KTI - Disposable Tatoo Instructions

KTI

Home
More
Disposable Tatoo Instructions

Disposable Fashion Tatoo Instructions

	Step1 Decide on the desired location for attachment. Shaving is recommended for those who have much hair on the attaching location; and please eliminate dead skin cells with soap water or wet tissue paper.		Step2 Confirm the Hello Tattoo product. (Stencil, clear vinyl, cosmetic gel, stick)
	Step3 Take off the white paper at the back of clear supporting vinyl.		Step4 Attach the clear vinyl on the stencil.
	Step5 Use the stick or fingernail to meticulously attach it without wrinkles. If it is not completely attached, some parts of images might remain or get tangled when taking off.		Step6 With the stencil and clear vinyl attached, bend the back paper 180 degrees and take it off. If it is not taken off properly, attach it precisely again before taking it off.
	Step7 Attach the stencil on desired part of body. Haul and stick meticulously so that the stencil does not pucker. If the stencil is not precisely attached, the ink might run and degrade the quality.		Step8 Attach the stencil on the skin, and carefully take off the clear vinyl. Again, attach the stencil on skin so that there is no gap.
	Step9 Take a suitable amount of cosmetic gel on the stick. Be careful when using the gel so that the gel does not get into eyes or smeared on hands. - If smeared on hands, wash off immediately. If you don't, it will not be erased and will remain for a certain amount of time.		Step10 Cosmetic gel should be applied evenly overall 3 times in the thickness of 1mm. If the thickness of gel differs according to part, it might look stained.
	Step11 For quick dry, scrape out a little of cosmetic gel on epidermis. If scraped with too much force, the stencil might come off or the pattern might become pale.	Step12 Dry naturally for approximately 30 minutes. - Do not use a hair dryer to dry artificially. - Be careful so that the cosmetic gel does not smear on others' clothes or around you.
	Step13 After about 30 minutes, carefully and slowly take the stencil off. The stencil is connected by thin lines, which will break if you take it off with force; so inconvenience of taking it off in parts might occur.		Step14 Use flowing water and soap to carefully wash the hardened gel on the surface.
*If it does not come off easily, do it little by little going around each of the 4 corners, wash off the remaining stencil with water and take off the rest.